electrical engineering
-

When we talk about diode series resistance, we are referring to the resistance that is present in the diode when it is conducting current. This resistance is not just a simple number; it can change based on various factors, such as the amount of current flowing through the diode and the temperature of the diode…
-

Unlike a simple switch, a circuit breaker is capable of safely interrupting the extremely large short-circuit currents that occur during a fault (such as a line-to-line or line-to-ground fault) at high voltages, which typically refers to voltages of 72KV and above. When a fault is detected by protective relays, the breaker’s contacts open, creating an…
-

Radial and interconnected distribution networks represent two distinct approaches to the design and operation of electrical distribution systems. A radial distribution network is characterized by a tree-like structure where power flows from a single source through a series of branches to reach various consumers. This configuration is straightforward and easy to manage, but it can…
-

A transformer is a passive electrical device that transfers alternating current (AC) electrical energy from one circuit to one or more other circuits. Its core function, based on the principle of electromagnetic induction, is to change the voltage level; either stepping it up (increasing voltage for efficient long-distance transmission) or stepping it down (reducing voltage…
-

Photovoltaics is the technological principle and scientific field concerned with the direct conversion of light energy, specifically photons from sunlight, into electrical energy through the photovoltaic effect, a physical and chemical process that occurs within a class of materials known as semiconductors, most commonly crystalline silicon. The fundamental unit of this conversion is the photovoltaic cell,…
-

A simple circuit is an electrical circuit that consists of just a few basic components, creating a closed loop through which electric current flows. Typically, it includes a power source like a battery, a conductive path such as wires, and a load, which can be a device like a light bulb or resistor that uses…
-

Electric current is the organized flow of electric charge through a material or space over time. In everyday circuits this charge is usually carried by electrons moving through metal wires, but in other situations it can be carried by ions in a liquid, or by both ions and electrons in a gas or plasma. Even…
-

Transmission electron microscopy (TEM) is a powerful imaging technique that uses a beam of electrons transmitted through an ultrathin specimen to produce highly magnified images of its internal structure. TEM works by directing electrons through a sample that is typically less than 100 nanometers thick. As the electrons pass through, they interact with the atoms…
-

Transmission in electric power systems refers to the bulk transfer of electrical energy at very high voltages (typically 115 kV to 765 kV or higher) from generating stations to major substations, using interconnected networks of overhead or underground lines designed to move large amounts of power efficiently over long distances with minimal losses. Subtransmission, by…
-

Alternating Current (AC) is a type of electric current characterized by a continuous and periodic reversal in the direction of charge flow, which results in a sinusoidal (or other periodic waveform) variation in voltage and current magnitude over time. Unlike Direct Current (DC), which maintains a constant polarity and direction, AC systematically oscillates between a…
-

Substations are essential components of the electrical power system. They serve as the connection points between the high-voltage transmission lines and the lower-voltage distribution networks that deliver electricity to homes and businesses. At a substation, electricity is transformed from high voltage to a lower voltage, making it safe for use. This process is crucial because…
