A Bitcoin miner can build the block it wants to mine while sharing rewards with a pool. OCEAN’s open-source DATUM Gateway makes the arrangement possible, and two recent developments address practical deployment: v0.5.1beta, released in October 2026, removes an unnecessary multiplier restricting client capacity on larger setups; a Foreman installation guide updated November 19 documents a way to set up Bitcoin Core and the gateway from its Pickaxe management interface. Neither change increases an ASIC’s raw hashrate.
The operational appeal is control of transaction selection. A conventional Stratum V1 pool generally hands miners work built from the pool’s own block template. With DATUM, a local Bitcoin node selects transactions and constructs a candidate block. The gateway converts that template into jobs ordinary mining hardware can process, while OCEAN performs share accounting and pooled payouts. The arrangement differs from solo mining, where finding a full valid block is generally necessary before earning a reward.
Video: OCEAN’s January 2025 node-setup livestream with Bitcoin Mechanic, Luke Dashjr and Jason Hughes explains the architecture. It predates the October 2026 gateway update. Watch directly on YouTube.
What changed in the gateway
The 0.5.1beta release notes identify a narrow fix: removing a client-count multiplier that unnecessarily limited how many miners a large installation could accommodate. The release does not establish a verified new device limit or a universal throughput percentage. Operators must still account for CPU, memory, local network reliability and how promptly the node updates mining jobs when a new Bitcoin block arrives.
OCEAN’s project documentation describes DATUM as public-beta software. Miners continue connecting to the local gateway through familiar Stratum V1 interfaces; the gateway and pool use their separate encrypted connection. The protocol is not interchangeable with every mining pool and should not be confused with the Stratum V2 block mined by MARA. Both approaches aim to reduce dependence on pool-selected transactions, but use different implementations.
A fleet-management shortcut
Foreman’s November 19 guide says its Pickaxe host can install a pruned Bitcoin Core node alongside DATUM without a manual terminal workflow. It lists a 64-bit Intel or AMD Linux host, at least four CPU cores, 16 GB RAM, 50 GB total disk space and appropriate outbound connectivity. Initial validation still downloads roughly 800 GB of historical blockchain data before pruning older blocks, according to Foreman’s current estimates. A small final disk footprint does not eliminate the initial bandwidth cost.
The same guide reports a 1% OCEAN pool fee for DATUM miners versus its standard 2%. Foreman also quotes estimated upstream bandwidth savings and reduced stale work, but the figures are vendor estimates rather than guaranteed mining profits. Actual results depend on block propagation, network topology, pool availability and the rig’s accepted shares.
Video: a 2026 Ubuntu walkthrough for configuring a Bitcoin node and DATUM Gateway. The installation example is independent background material, not a test of Foreman’s November setup flow. Watch directly on YouTube.
Where the risks remain
Foreman recommends moving one test miner first, checking accepted shares at the pool, and retaining a direct-pool failover. A local node must fully sync before it can build valid jobs. Operators should review transaction policies, local credentials, firewall rules, backup power and software upgrade plans; a failed gateway can interrupt hashing or cause stale work even while every ASIC remains powered.
DATUM’s model fits the wider discussion in our comparison of solo and pooled mining, Stratum V2 reference implementation coverage and mining decentralization grants. Local template construction does not remove every dependency on the pool, but it places an important decision about Bitcoin transactions back with the individual miner.
The verifiable milestone is improved deployment tooling and a specific large-client bug fix, not evidence of higher SHA-256 efficiency. An engineer evaluating DATUM should examine the upstream release, test a fully synced node and confirm actual site-level share performance before changing a production fleet.

Leave a Reply