Data Center News
-
An Optical Loss Test Set (OLTS) is a specialized instrument used in fiber optic networks to measure the total optical loss across a fiber link. It combines a calibrated light source and a power meter to determine how much signal is lost as light travels from one end of the fiber to the other. This…
-
Near-End Crosstalk (NEXT) is a type of signal interference that occurs when a transmitted signal on one wire pair induces unwanted noise onto an adjacent pair at the same end of the cable where the signal originated. NEXT is most commonly encountered in twisted-pair cabling systems, such as those used in Ethernet networks. It happens…
-
A splitter in terms of coaxial cable is a passive device that divides a single incoming radio frequency signal into multiple outputs, allowing several devices such as televisions, modems, or receivers to share the same signal source. It maintains a standard impedance of 75 ohms to prevent signal reflection and distortion, ensuring stable performance across…
-
A Time Domain Reflectometer (TDR) is a diagnostic instrument used to detect faults, breaks, and impedance mismatches in coaxial cables by sending a signal pulse down the line and analyzing the reflections that return. When the pulse encounters a change in impedance—such as a splice, open, short, or damaged section—it reflects back to the TDR,…
-
A coaxial cable is a specialized electrical cable designed to carry high-frequency signals with minimal interference. Its name comes from its concentric structure—each layer shares the same axis, which helps preserve signal integrity. Coaxial cables are widely used in applications like cable television, internet service, radio transmission, and closed-circuit video systems. At the center of…
-
In telecom infrastructure, MXC is a synonym for MDF—both refer to the Main Cross-Connect, the central point where external carrier circuits interface with a building’s internal network. The Main Cross-Connect (MXC), also known as the Main Distribution Frame (MDF), is the primary physical interconnection point in a facility’s telecommunications system. It serves as the demarcation…
-
A patch cord is a short, pre-terminated cable with connectors on both ends, used to connect network devices for signal or data transmission. Patch cords are essential components in structured cabling systems, enabling flexible and efficient interconnections between equipment such as switches, routers, servers, and patch panels. They are typically used in environments like data…
-
The Electronic Industries Alliance (EIA) was originally formed in 1924 as the Radio Manufacturers Association. It evolved into a major standards body for electronic components and systems in the United States. EIA was responsible for developing specifications that ensured interoperability and quality across manufacturers, particularly in consumer electronics and telecommunications. In 1988, EIA’s telecommunications division…
-
A premise cable technician specializes in installing and maintaining cabling systems within buildings or campuses. Their work typically involves running Ethernet, coaxial, and fiber optic cables through walls, ceilings, and conduits to support voice, data, and video services. These technicians are responsible for terminating cables at patch panels and jacks, testing and certifying cable runs…
-
A Visual Fault Locator (VFL) is a handheld optical testing device used in fiber optic networks to identify faults, breaks, or discontinuities in optical fibers. It emits a highly visible red laser light (usually around 650 nm) into the fiber, which allows technicians to visually trace the fiber path. Any break, bend, or poor connection…
-
Direct burial in fiber optics refers to the installation of specially designed fiber optic cables directly into the ground without the need for protective conduits or ducts. These cables are engineered to withstand harsh underground conditions for long-term, maintenance-free operation. Direct burial fiber optic cables are constructed with multiple protective layers to endure soil pressure,…
-
A coupler functions by redistributing light from one or more input fibers into one or more output fibers. It does this without requiring external power, relying instead on physical principles like evanescent field coupling or fused biconical taper (FBT) technology. In FBT couplers, two or more fibers are precisely fused and tapered together, allowing light…
